Optimus M130 Instrucciones De Seguridad página 43

4. Connector to the M130 matrix.
The connector Pin description of the remote control M134P and M134T (RJ45 CAT5 UTP) is
as follows:
PIN Nº Name
1 Tx+
2 Tx-
3 Rx-
4 DC output
5 GND
6 Rx+
7 Audio +
8 Audio -
5. Follow the table below to configure the address of the remote controls:
DIP switch 1
M130 Version 1.0
M130
Description
Positive transmission RS-422
Negative transmission RS-422
Negative reception RS-422
+24VDC power
Digital ground
Positive reception RS-422
Balanced audio positive
Balanced audio negative
DIP switch 2
OFF OFF
ON OFF
OFF ON
ON ON
OFF OFF
ON OFF
OFF ON
ON ON
DIP switch 3 Zones
OFF Zone 1
OFF Zone 2
OFF Zone 3
OFF Zone 4
ON Zone 5
ON Zone 6
ON Zone 7
ON Zone 8
8x8 Audio Matrix
Page 20 of 23