Night Mode; Using Bluetooth - Denon DHT-T110 Manual Del Usuario

Altavoz base para la tv
Ocultar thumbs Ver también para DHT-T110:
Tabla de contenido

Publicidad

Night Mode

Night Mode improves low-volume listening by subtly lifting softer sounds, and lowering very loud ones. While you may use
Night Mode whenever you like, for maximum dynamic realism from television programming, movies or music, leave night
mode turned off.
To engage Night Mode, press the Day/Night
Listening Mode button
Mode dimly lights. To exit Night Mode, use the same buttons in the same way. When DHT-T110 exits Night Mode, the LED
pattern for the current lsitening mode brightly lights.
Volume Change Indication
When you adjust DHT-T110's volume from the remote control, the 8 front-panel LEDs momentarily function as a horizontal
"bar-graph" of the volume setting reached, illuminating from 1 to all 8 buttons, the latter indicating maximum volume.
Using Bluetooth®
DHT-T110 can stream music wirelessly, via Bluetooth, from any compatible Bluetooth device such as a mobile phone, tablet, or
laptop computer.
Pairing Your Bluetooth Device
Before you can stream Bluetooth audio to DHT-T110, you must pair your device to DHT-T110.
To pair the device to the DHT-T110 for the first time:
1 Press-and-hold the Bluetooth key
to flash rapidly.
2 Go to Bluetooth settings on your device. Make sure the device's Bluetooth feature is set to "on".
3 From the Bluetooth list on your device, select "DHT-T110".
4 Playback audio on the Bluetooth source; you should now hear audio from the DHT-T110. DHT-T110's Bluetooth key LED
will remain on as long as DHT-T110's Bluetooth input is selected and active.
DHT-T110 can pair multiple Bluetooth devices; however, only one can play at a time. First come, first served. One Bluetooth
Source will need to be disconnected before another paired device can play.
DHT-T110E3_140805.indd
15
button on the remote control press, or press and hold the front panel
for three seconds. When Night Mode is engaged, the LED pattern for the current Listening
(front panel or remote) for at least 3 seconds; the Bluetooth LED will begin
15
2014/08/05
10:41:28

Publicidad

Tabla de contenido
loading

Tabla de contenido