Swann SWWHD-FLOCAM Guia De Inicio Rapido página 8

4 Unscrew the cable clamp from the junction box. Connect the active, neutral, and earth
wires to the terminal block in the junction box as marked according to the connection
diagram below.
Make sure each wire is firmly screwed to its corresponding terminal.
Brown Floodlight Wire
Green/Yellow Floodlight Wire
Blue Floodlight Wire
5 Fasten the electrical supply cable to the junction box using the cable clamp. Screw the
cable clamp down tightly.
6 Place the floodlight unit (make sure the "UP" arrow on the back is pointing up) against
the junction box, aligning the center mounting holes and lock it securely with the
provided long mounting screw and washer.
7 Insert the provided screw cap firmly into the center mounting hole on the floodlight
unit.
8
h
Englis
EN
INSTALLATION INSTRUCTIONS
Terminal Block
L
Live
Brown (Active Supply Wire)
Earth
Green/Yellow (Earth Supply Wire)
N
Neutral
Blue (Neutral Supply Wire)