Before Operation - Sanyo ICR-B220 Manual De Instrucciones

BEFORE OPERATION

Turning the power on and off
Slide the POWER switch (rear of the unit) to ON to turn on the power. The
unit is now in stand-by mode.
Example:
Folder name
Current file number
To turn off the power, slide the POWER switch to OFF in the stop mode.
Auto power off function
The power turns off automatically in about 10 minutes after entering the
stop mode.
Hold function
If the control switch or operating button is pressed while the POWER switch
is set to OFF, "POWER OFF" appears briefly on the display. It prevents
accidental playback or recording.
Earphone
Connect an earphone (not attached) to the EAR socket. (The speaker is
automatically disconnected.)
Note: Be sure to reduce the volume before connecting or disconnecting the
earphone.
External microphone
Connect an external microphone (not attached) to the MIC socket. (The
built-in microphone is automatically disconnected.)
7
Author name
USER-01
BU 1/ 1
Total file number
NEW