Power Supply - Sanyo ICR-B220 Manual De Instrucciones

POWER SUPPLY

Batteries
1. Open the battery compartment lid.
2. Install two "AAA" batteries
(attached). Observe proper
polarity.
Battery indicator ( )
The line of rectangles is the battery gauge. Black
rectangles show the battery condition while the unit is operating.
: Full, good condition
("LOW BATT" appears.): Weak or exhausted batteries, must be replaced.
CAUTION:
• Do not replace the battery while the power is on. It may cause the unit
malfumction.
• Remove the batteries if the unit will not be used for a month or longer.
• Dispose of all used batteries safely in accordance with all applicable
laws.
IMPORTANT NOTE:
SPENT OR DISCHARGED BATTERIES MUST BE RECYCLED OR DIS-
POSED OF PROPERLY IN COMPLIANCE WITH ALL APPLICABLE
LAWS.
FOR DETAILED INFORMATION, CONTACT YOUR LOCAL COUNTY
SOLID WASTE AUTHORITY.
WHAT TO DO IF...
If the operation of the unit or display is not
normal,
1. Open the battery compartment lid.
2. Press the RESET switch using a small ball-
point pen, etc.
3. Resume operation.
5