Motion Detector Low Battery Indication - Honeywell RCA902N Instrucciones De Instalación

RCA902A

Motion Detector Low Battery Indication

The 9V battery should operate the detector for approximately 12 months depend-
ing on the number of activations each day and the effect of low temperatures. When
the battery is nearing the end of its life (about 30 days before failure), the low battery
status will be indicated by the red LED behind the detector lens flashing 5 times after
movement is detected. You should change the battery in the detector as soon as you
notice the low battery signal or if the detector stops working altogether.
Testing:
The system may be tested by placing the detector into Walk Test, (see "Motion
Detector Walk Test").
17 69-2157EFS—05
69-2157EFS_C.indd 17 9/22/2008 11:54:05 AM