Connecting To The Internet And Registering The Product - Ariston LIGHT GATEWAY Instrucciones De Instalacion Y Uso

IMPORTANT:
You can use Ariston Net with several devices at once: simply use the same cre-
dentials to log in. The app includes an option for registering more than one Ari-
ston Net gateway with a single user account.
6. CONNECTING TO THE INTERNET
AND REGISTERING THE PRODUCT
Hold down the AP button (for at least 5 seconds) until the WEB led
fl ashes green. After a maximum of 40 seconds, the gateway creates a
new WiFi network that remains active for 10 minutes, after which you will
need to repeat the procedure.
IMPORTANT!
When running the TC and TD procedures described below, it is best
to leave the default setting DHCP = ON unchanged.
The setting DHCP=OFF must be selected for networks confi gured
in static IP mode.
6.1 Guided procedure for TELECONTROL (TC) with
or without the TELEASSISTANCE (TD) service
1. Open the app, login to your account and follow the guided procedure
2. The procedure was successful when:
- The gateway's WEB led will start fl ashing green rapidly and then turn steady on to
confi rm that the procedure was successful.
- the app displays a message confi rming that the product has been registered.
- the display shows the basic screen with the "
3. You can now control your Ariston appliance remotely using the smartphone app or
on the web portal www.ariston-net.remotethermo.com.
Browser-based procedure for TELEASSISTANCE (TD)
6.2
without TELECONTROL ( TC)
Open your smartphone's network settings and select "Remote Gw Thermo"
VIA APP
OPEN THE ARISTON NET APP,
WITHOUT LOGGING, AND FOLLOW
THE GUIDED PROCEDURE.
" icon steady
VIA BROWSER
OPEN YOUR WEB BROWSER AND ENTER 192.168.1.1 IN THE
ADDRESS BAR. SELECT THE WI-FI NETWORK AND ENTER
THE PASSWORD. WE RECOMMEND LEAVING THE DEFAULT
SETTINGS UNCHANGED
GB
\ 43