LaserLiner RollPilot S12 Manual De Instrucciones página 6

Delete measured value
1
The mechanical counter is set to zero by pressing button 7 or lever 8.
Fold for carrying
2
To measure from wall to wall
4
1. Position the device with the rear of
the measuring wheel against the wall.
2. Move the measuring wheel straight
to the other wall.
3. Read off the measured value and
add the diameter of the wheel.
!
To achieve accurate measurement results, the guide bar must be held at the same angle during
the entire measurement. A vertical position is recommended.
06
EN
R + Measurement
Fold out the stand
3
+ R