Connecting Speakers - Insignia NS-42PDP Guia Del Usuario

Insignia NS-42PDP 42" Plasma TV
Connecting your TV to an electrical outlet
To connect your TV to an electrical outlet:
1 Plug the power cord into the power connector
on the back of your TV.
2 Plug the other end of the power cord into an
electrical outlet.
Notes
• Make sure that you use the correct type of power. See the
label on your TV.
• If you do not intend to use your TV for an extended period
of time, unplug the power cord from the electrical outlet.

Connecting speakers

To connect speakers to your TV:
1 Unplug the TV power cord and all devices
connected to your TV.
2 Connect the speakers to the speaker jacks
on the back of your TV. Make sure that you
connect the black part of the speaker wire to
the – jack and the red part of the speaker
wire to the + jack on the back of your TV.
Black
Red
Right speaker
Left speaker
Note
The location of the speaker jacks on your TV may
vary from the illustration.
Connecting an outside antenna
Antenna cables come in two types: 75 ohm and
300 ohm.
If your antenna cable has a 75 ohm connector,
connect the cable to the coaxial jack on the back
of your TV.
If your antenna cable has a 300 ohm connector,
connect the cable to a 300-75 ohm adapter (not
included), connect the adapter to a 75 ohm
cable, then connect the other end of the 75 ohm
connector to the coaxial jack on the back of your
TV.
Use the following illustration to connect an
outside antenna.
VHF/UHF
antenna
300-ohm cable
with adapter
Antenna
cable
Black
Red
www.insignia-products.com
75 ohm cable
300-ohm cable
COMBINATION
ANTENNA
VHF/UHF
antenna
OR
75-ohm
cable
SEPARATE
ANTENNAS
UHF
antenna
Combiner
OR
Out IN
VHF
antenna
9