Digital Signal Processor; Using The Digital Signal Processor; Using The Graphic Equalizer; Recalling Equalizer Curves - Pioneer SUPER TUNER III D FH-P4200MP Manual Del Operador

Section
10

Digital Signal Processor

Using the digital signal
processor
1
3
The digital signal processor lets you control
many aspects of sound output including
equalization, sound field control and listening
position.
1 Equalizer curve
Shows which equalizer preset is currently
selected.
2 Position indicator
Shows which listening position is currently
selected.
3 Custom indicator
Shows when custom equalizer curve is cur-
rently selected.
4 Function display
Shows the function status.
5 Sound field program indicator
Shows which sound field program is cur-
rently selected.
% Press DSP to display the DSP function
names.
Press DSP repeatedly to switch between the
following functions:
PWRFL (graphic equalizer)50 : +1 (9-band
graphic equalizer)Posi (position selector)
SFC (sound field control)
38
En
2
4 5
# To return to the display of each source, press
BAND.
Notes
! If you do not operate the DSP function within
about 30 seconds, the display is automatically
returned to the source display.
! When you select 50 : +1 (9-band graphic
equalizer), the display is not automatically re-
turned to the source display.

Using the graphic equalizer

The graphic equalizer lets you adjust the
equalization to match car interior acoustic
characteristics as desired.

Recalling equalizer curves

There are seven stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves:
Display Equalizer curve
PWRFL Powerful
NTRL Natural
VOCAL Vocal
CTM1 Custom 1
CTM2 Custom 2
FLAT Flat
S-Bas Super bass
! CTM1 and CTM2 are adjusted equalizer
curves that you create. Adjustments can be
made with a 9-band graphic equalizer.
! When FLAT is selected no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
FLAT and a set equalizer curve.