Tabla de contenido
Publicidad
Pre-Filter
Préfiltre
Pre-Filtro
Alignment
Tab
Alignment
Indicator
Cleaning Pre-Filter
To Reinstall:
- 38 -
Empty dust bin.
While dust bin is open, grasp pre-
filter and rotate counter-clockwise to
remove.
Clean pre-filter by gently tapping
over a trash container.
Rinse with water only as needed, do
not use any detergent or soap.
Allow pre-filter to dry for 24 hours
before placing back into vacuum
cleaner.
Place dust bin upside down on a
table or flat surface with the lid
facing away
Align the indicator on the pre-filter
with the alignment tab inside dust
bin.
Rotate pre-filter clockwise to lock in
place.
Publicidad
Tabla de contenido
