To Clean The Pre-Filter - Panasonic MC-UL675 Instrucciones De Operación

Ocultar thumbs Ver también para MC-UL675:
Tabla de contenido

Publicidad

To Clean the Pre-filter

➢ ➢ Turn clockwise and pull the pre-filter.
➢ ➢ Return the pre-filter to the dust bin,
➢ ➢ After the dust bin is empty of debris,
➢ ➢ Reassemble upper and lower dust
➢ ➢ A retention clip is located on the
➢ ➢ This clip may release when the dust
➢ ➢ To reassemble, slide the tabs on the
➢ ➢ Secure in place using the retention
- 36 -
Clean by gently tapping over a trash
container.
aligning the pre-filter tabs to the
lower dust bin slots, then turn
counter-clockwise to the lock
position.
firmly close the door. Make sure you
hear a "click" sound to indicate that
the door is fully latched.
bins. Place dust bin unit back into
vacuum cleaner by inserting the
bottom first and tilting back.
hinge area of the dust bin.
bin door is opened to prevent
damage to the door or the dust bin.
dust bin door into the slots on the
dust bin.
clip.

Publicidad

Tabla de contenido
loading

Tabla de contenido