Quick Setup Guide; What Is In The Box; Installation; Desktop Installation - Johnson Controls Kantech INTEVO Compact LTE Guía De Instalación Rápida

8

Quick setup guide

What is in the box?

INTEVO Integrated Security Platform
l
Power cords
l
Quick Setup Guide
l
2 wall mount brackets
l
Screws, 6 for Advanced; 4 for Compact and LTE
l
USB Key including: documentation, Detection Tool, EntraPass, and IP video
l
software
4 plastic footings
l

Installation

Desktop installation

Avoid storing anything near the device that could block air flow.

Wall Mount Installation

1. Fix the brackets on each side of the housing with the supplied screws.
2. Fix to the wall the INTEVO housing with the brackets provided using 4 screws (not
included). It is best practice to use stainless steel Phillips tapping screws M4.2 x
32mm (#8 x 1.25 in) (Spaenaur ST- 631P or equivalent). For drywall mounting use
four 4 plastic anchors (Spaenaur EX-S5 or equivalent; not included).

Rack Mount Installation (not included)

Precautions
Elevated Operating Ambient - If you install the device in a closed or multi-unit rack
l
assembly, the operating ambient temperature of the rack assembly may be
greater than the room temperature. Give consideration to installing the
equipment in an environment compatible with the maximum ambient
temperature (Tma) specified by the manufacturer.
Reduced Air Flow - Installation of the equipment in a rack must be such that the
l
amount of air flow required for safe operation of the equipment is not
compromised.
© 2018 Tyco Security Products. All rights reserved.