Status Indicator Lights; Status Window - Kenmore 587.1233 Serie Guía De Uso Y Cuidada

Operating Instructions

Status Indicator Lights

The WASHING light comes on at the
beginning of cycle and remains on until the
end of the main wash.
The DRYING light indicates the drying
portion of the cycle. The light will come on
when either drying option is selected.
The LOW RINSE light comes on at the end
of a cleaning cycle when the rinse agent
reservoir is low. The light will remain on
throught 5 successive cyles or until the
reservoir is fi lled.
The CLEAN light will come on at the end of
cycle and remain on until door is opened.

Status Window

The STATUS window, indicates the
following activity:
1H-24H .......... Number of delay start
hours. The Last hour will count down
in minutes.
CL ................... Close dishwasher door.
The status indicator lights will also
fl ash to indicate current cycle status.
Hd................... Incidates a water heat
delay.
MINUTES....... Number of minutes left
in cycle (1-99). If cycle is longer than
99 minutes, a small light will appear in
the lower right corner and remain on
until time counts below 99.
PF..................... Appears in window
when dishwasher is fi rst installed, or
when power has been interrupted. HI-
TEMP WASH and AIR DRY indicator
lights will also fl ash. To clear, touch
START/CANCEL pad.
LO.................... Appears in window
when the rinse aid dispenser is low and
needs to be refi lled.
9 9