Compliance Statement - PSC Magellan 1000i Guía De Referencia Rápida

3. Verify that the interface cable is securely attached to the scan-
ner.
4. Check that the bar codes are of sufficient quality to be recog-
nized by the scanner. Wrinkled, smudged, or torn labels can
cause the scanner to not read at all. Scan known-good labels
of an active symbology
tion.
5. Ensure that the scanner's interface type is compatible with
the host terminal by consulting your POS system manual
and/or the Product Reference Guide.
If the scanner still does not function properly, contact your local
supplier or PSC Customer Support Services.

Compliance Statement

This device complies with Part 15 rules. Operation is subject to
the following conditions:
1. This device may not cause harmful interference; and
2. This device must accept any interference received, including
interference that may cause undesired operation.
This Class A digital apparatus complies with Canadian ICES -003.
Cet appareil numérique de la classe A est confrome à la norme NMB-003 du
Canada.
LED Class
CLASS 1 LED PRODUCT
LED KLASSE 1
1. Reading of the various bar code symbologies can be independently
enabled or disabled in the scanner.
4
1
to check the scanner's read opera-
APPARECCHIO LED CLASSE 1
APPAREIL A LED DE CLASSE 1
EN60825-1
®
Magellan 1000i