Quick Reference - PSC Magellan 1000i Guía De Referencia Rápida

Quick Reference

This guide is provided to help get your installation up-and-run-
ning quickly and efficiently. For more details, including program-
ming information, reference the Product Reference Guide (PRG),
which is available for viewing and download from the PSC web-
site listed on the back cover of this manual.
Installation
Route the interface cable from the terminal or host. Plug the AC
adapter (if one is used) into a wall outlet and the interface (I/F)
cable, then route and attach the I/F cable to the scanner. Verify
operation by presenting known-good bar codes to the scanner.
The unit should beep
the bar code data to the host or terminal. If not, refer to the Trou-
bleshooting section of this guide.
Scanner installation is complete.
Connect
Here
1. Beeper and LED behavior is selectable and may have been disabled
by a previous user.
Quick Reference Guide
1
and/or flash its good read LED and send
I/F Cable
To Host/Terminal
For 220-230 VAC
adapters, the
cord must be
facing down as
shown in the
illustration. If
installed upwards,
A/C Adapter it will pose an
(if needed) undue strain on the
socket outlet.
1