Power Supply; How To Scan - PSC Magellan 1000i Guía De Referencia Rápida

Optional Stand
An optional stand is available for the scanner which can be
permanently attached to a wall or countertop. After locating the
stand in an optimal position, the scanner (along with the stand)
can be detached for portable use by lifting the entire unit as
shown below.

Power Supply

1
Some models require either a Listed Class 2 or Listed LPS power
source which supplies power directly to the unit.

How to Scan

Bar codes can be presented to the scanner while it is resting on
the counter or in the optional stand, or the scanner/mount can be
lifted and held as shown.
Switch Option Shown
*Optional Stand
1. Power Off the Terminal (POT) units do not require a power supply.
®
2 Magellan 1000i