Y- Extra Rinse Push-Button - Taurus TLV 5555 Manual De Instrucciones

English
A- Rinse and hold push-button
When activated "button IN", it makes the wash cycle of the synthetic and wool
programs stop during the last rinse with the drum full of water. This operation is
advisable to prevent creasing in certain fabric which need to be drip dried.
To end the cycle, press the button again "button OUT".
C- No spin push-button
When activated "button IN", the spin is eliminated from all the programs
of the machine.This operation is necessary for certain types of delicate fabrics.
M- Half load push-button
When activated (button IN), the machine automatically runs the programm with a
considerable water saving. Recommended only when the load is less than Half load.
Never press for wool and synthetics programs.
R- 550/850-1000 rpm push-button
S e l e c t s t h e s p i n s p e e d o f t h e l a s t m i n u t e s o f t h e c o t t o n p r og r a m m e s .
Button OUT : the spin speed is 850-1000 rpm.
Button IN : the spin speed is 550 rpm.
X- ON/OFF push-button
Once the adequate programme has been selected,the washing machine can be
started by pressing this button "IN" and it will automatically carry out all the
chosen functions until the end of the programme.(Stop position). When the push-
button is pressed "OUT", the machine will not work.

Y- Extra rinse push-button

When it is not operated "button OUT" the machine will automatically carry out
t h e p r o g r a m m e s f o r c o t t o n w i t h a c o n s i d e r a b l e s a v i n g o f w a t e r.
It is only advisable when the load is equal to or less than half load. With bigger
loads it is advisable to operate this button "button IN" so that greater rinse
eff iciency is obtained.
44