NetSpa VITA PREMIUM Guía De Instalación Y Utilización página 33

5.3. drainage and storage
drainage
Check the stopper on the bottom of the pool and the drain cap.
1
Unscrew the drain cap.
2
Connect the drainage hose.
3
Remove the stopper on the bottom of the pool. Completely drain all water from the
4
spa pool.
Once empty, the pool can be cleaned with soap and water.
1
Storage
5 Press the bubbling button to blow out the water inside the jet holes. Unplug the
pump, remove the filter cartridge from the inner wall of the pool.
6 Open the drain valve on the bottom of pump, let the water flow out and fasten the
drain valve.
7 Use a towel to wipe off the pool, dry 24 hours. Fold the pool.
It is recommended that store the SPA in its original package in a warm dry place.
5
5.4. repair kit
Little holes or puncture can be repaired with the repair kit included and glue reserved to
pool liner.
1. Find the leak.
2. Thoroughly clean the area surrounding the leak.
3. Cut a piece of repair material in round shape, which should be larger than the dam-
aged area.
4. Apply adhesive to the underneath side of the patch and around the area to be re-
paired.
5. Put the patch on the damaged area and press down firmly. Allow 12 hours for repair
to dry. After patch has dried, apply glue around the edges for a complete seal (dry 4
hours).
2
6
3 4
7
EN
33