Dragon Touch Vision 4 Manual Del Usuario página 7

CUSTOMIZING YOUR VISION 4
VIDEO SETTING
1. Video Resolution: 4K 30FPS, EIS 4K 30FPS, 2.7K 30FPS, 1080P 60FPS, 1080P 30FPS,
720P 120FPS
Default setting is 4K 30FPS.
Note: When capturing video at high resolutions or high frame rates in warm ambient
temperatures, the camera may become warm and use more power.
2. EIS: On / Off
Default setting is off.
This setting adjusts the footage to offset for motion during capture. The result is smoother
footage, especially in activities with relatively small but fast motion including cycling,
motorcycling, and handheld uses.
Note: 1). If you turn on EIS, then select 4K 30FPS, EIS will be turned off automatically.
2). If you select 4K 30FPS, then turn on EIS, the video resolution will be EIS 4K 30FPS
automatically.
3. Loop Recording: Off / 1 Min. / 3 Min. / 5 Min.
Default setting is off.
Loop recording allows your camera to overwrite old files with new files. Once the memory
ard becomes full, the camera will delete the first video file to make room for the latest file.
For example, if the setting for loop recording is "1 Minute", then the camera will create
video clips of 1 minute in length, and a 1-minute clip will be deleted when the camera
needs more memory.
4. Time Lapse Video: Off / 1 Sec. / 5 Sec. / 10 Sec. / 30 Sec. / 60 Sec.
Default setting is off.
Time Lapse Video creates video from frames captured at specific intervals. This option lets
you capture a time lapse event and immediately view or share it as a video. Time Lapse
Video is captured without audio.
09
5. Slow Motion: Off, 1080P/60FPS, 720P/120FPS
Default setting is off.
Slow motion is an effect in film-making whereby time appears to be slowed down.
Note: If you use Slow Motion function, EIS will be turned off automatically.
Slow motion video is captured without audio.
6. Audio Record: On / Off
Default setting is on.
Turn off Audio Record, the camera does not record audio when you record video.
PHOTO SETTING
1. Photo Resolution: 16M / 14M / 12M / 8M / 5M
Default setting is 16M.
2. Time Lapse Photo: Off / 2 Sec. / 10 Sec.
Default setting is off.
Time Lapse Photo captures a series of photos at specified intervals. Use this mode to
capture photos of any activity, then choose the best ones later.
3. Burst Photo: Off / 3 Photos / 5 Photos
Default setting is off.
Burst captures up to 5 photos in 1 second, so it is perfect for capturing fast-moving
activities.
GENERAL SETTING
1. Volume: 0-10
Default setting is 5.
Press Up button to turn up the volume.
Press Down button to turn down the volume.
2. Beep: On / Off
Default setting is on.
Sets the volume of your Vision 4's alerts.
10