Safety Rules; Axis Network Cameras - Axis T95A00 Guia De Instalacion

AXIS T95A00/T95A10 Dome Housing
AXIS T95A00/T95A10 Dome Housing
The AXIS T95A00/T95A10 Dome Housing can be used in both indoor and outdoor camera
installations. Follow these instructions to complete the installation of the AXIS T95A00/T95A10
Dome Housing and Axis network camera.
Warning!
High voltage - the electrical connection must be made by an authorized electrician.
Please observe relevant national and local regulations for the installation.
• "Package Contents" on page 4
• "Installation" on page 5
• "Technical Specifications" on page 15

Safety Rules

Only qualified technical personnel must install this device.
• Disconnect the power supply before any technical work on the appliance.
• Do not use old or worn out power supply cables.
• Never make changes or connections that are not shown in this handbook; improper use of
the appliance may cause serious hazard and may damage the product.
• Use original spare parts. Non-original spare parts could cause fire, electrical discharge, or
other hazards.
• Before installing the device, check the supplied material to make sure it corresponds with
the order specification.
• Please retain this manual for future reference.

Axis Network Cameras

The AXIS T95A00/T95A10 Dome Housing supports the following camera models:
Camera Model:
• AXIS 213 PTZ
• AXIS 214 PTZ
• AXIS 215 PTZ
• AXIS 231D+/232D+
• AXIS 233D
Note:
Before you begin, make sure that the AXIS
T95A00/T95A10 Dome Housing package contents, power
supply, and the required cables, tools, and documenta-
tion are available. See "Package Contents" on page 4.
Page 3