Maintenance And Cleaning - lbx HDB Serie Manual De Usuario

7. Faults
•
The device does not start:
Check if the power line is unplugged.
Check if the fuse is broken or loose.
• The set temperature can't be reached:
Check if the control panel has been damaged.
The electric resistance could be damaged.
If these faults are not resolved, please contact manufacturer/supplier.

8. Maintenance and Cleaning

 Proper maintenance can keep instruments working properly and lengthen its lifetime.
 Do not spray cleanser into the instrument when cleaning.
 Unplug the power line while cleaning.
 Only use recommended cleansers
Dyes
Construction materials
Cosmetics
Food
Fuels
 Before using other cleaning or decontamination method, the user must ensure with the
manufacturer that this method will not harm the instrument.
 Wear the proper protective gloves during cleaning procedures.
 The device needs to be cleaned and decontaminated before sending to repair.
 Must be sent with the original packing.
 Make sure the device is used on a clean and dry surface and that the ambience temperature
is steady.
:
Isopropyl alcohol
Water containing tensides / Isopropyl alcohol
Water containing tensides / Isopropyl alcohol
Water containing tensides
Water containing tensides
9