Output Display; Menu Structure - baltur BGN 60 Lx Guía Rápida

FREQUENCY CONVERTER

Output Display

When the control panel is powered up, the panel displays the actual output frequency. Whenever the MENU
button is pressed and held, the control panel resumes this OUTPUT display.
To toggle between output frequency and output current, press the UP or DOWN button.
To set the output frequency, press ENTER. Pressing the UP/DOWN buttons changes the output
immediately. Press ENTER again to return to OUTPUT display.

Menu Structure

ACS ... has a large number of parameters. Of these, only the so-called basic parameters are initially visible.
The menu function -LG- is used to make the full parameter set visible.
Setting Parameter Value
Press ENTER to view the parameter value.
To set a new value, press and hold ENTER until SET is displayed.
Note! SET blinks, if the parameter value is altered. SET is not displayed, if the value cannot be altered.
Note! To view the parameter default value, press the UP/DOWN buttons simultaneously.
23