Rockford Fosgate RFX Serie Manual De Instalación Y Funcionamiento página 21

S
YMPTOM
Error 3
(Loading Error)
Error 4
(Unloading
Error)
Error 5
(Elevator Error)
Error 7
(Focus Error)
Error 9
(TOC Error)
NO CD
(No Disc Error)
NO CONN
(Communication
Error)
CD Changer
does not operate
Disc is jammed
in the CD
Changer
D
IAGNOSIS
Tray loading has not completed
after 5 seconds
Loading mechanism and motor (or
driving circuit) is defective
Tray unloading has not completed
after 5 seconds
Unloading mechanism and motor
(or driving circuit) is defective
Magazine tray is jammed
The laser pick-up is defective
Disc is warped or damaged
Disc is warped or damaged
The laser pick-up is defective
Magazine is empty or not installed
in the unit
8-pin DIN cable is
disconnected from the CDX
mechanism or source unit
CDX cable is intermittent or
severely damaged
CDX cable is disconnected from
the Source Unit or CD Changer
Disc load/unload problem
T
ROUBLESHOOTING
Press Eject, pull out the magazine, and try again.
Repair mechanism and loading motor (or driving
circuit)
Press Eject, pullout the magazine, and try again.
Have a service center repair mechanism and
loading motor (or driving circuit)
Repair CD changer mechanism.
Repair the laser pick-up
Put in a new disc
Put in a new disc
Have a service center repair the laser pick-up
Check the magazine and insert discs
Check the connection of 8-pin DIN cable between
the CDX and unit
Check connections and repair or replace CDX
cable as necessary
Check connections at the Source unit and CD
Changer and repair wiring as necessary
Try Ejecting magazine. If CD Changer still does not
operate, see your Local Authorized Rockford
Fosgate Dealer
– O CD C
PTIONAL
R
EMEDY
HANGER
21