Packing List; Technical Specifications; Principle Of Operations - Sinvest VGE Blue Lagoon BL220 Manual Del Usario

PACKING LIST

The pump is supplied complete with:
1. Bracket for wall installation
2. Standard kit including suction and delivery tubes, foot filter and injection valve
3. Power cable (pre-wired)
4. Instruction manual

TECHNICAL SPECIFICATIONS

Flow rate / Pressure 1.8 l/h @ 1 bar
Suction / head tube 4x6 mm, PVC Crystal
Materials PP case, Lexan control panel, polycarbonate transparent protection, PBT
roller-holder with Delrin (self-lubricant) rollers, Santoprene internal tube,
and PP fittings
Environment Working temperature
Storage temperature
RH
Protection rate IP54
Dimensions 100 x 160 x 135 mm
Weight approx. 2 kg
Power supply 230 Vac, 50 Hz, single phase
Power consumption max 10 VA
Electrical protection Fuse 1 A (@ 230 V), 5x20 mm
Display LED, 3 digit
Level input on proper connector, accept ohmic contact from level sensor, 5 V / 5 mA
pH/RX input on BNC connector, input impedance greater than 10^12 , precision better
than 1% FS, repeatability better than 0.2% sul FS
Maesure ranges 0.00 to 14.00 pH; 0 to +1000 mV (redox)

PRINCIPLE OF OPERATIONS

The principle of operation of the peristaltic pumps is based on the pressure and subsequent release
of the internal tube by the roller mounted on the roller-holder, which is driven by the motor. The
dual action of pressure and release of the tube generates a suction force along the tube itself which
primes the liquid and guide it to the injection line.
The command is sent to the motor by the electronic unit according to the program, to the detected
measurement and to the absence of alarms / errors. These pumps are also equipped with a built-in
instrument, that detects and manages pH and redox measurements.
INSTALLATION
Install the pump in a dry area, at a maximum ambient temperature of 45°C, and place it such as to
allo w easy adjustment and maintenance operations. Wall mount the pump using the supplied
bracket. Secure the bracket to a vertical wall (±15°) and attach the pump.
max 45°C
max 60°C
max 90% noncondensing
UV-C and Pool equipment UV-C and Pool equipment
BL220 PERISTALTIC PUMPS | 5
EN