Configuration - Sinvest VGE Blue Lagoon BL220 Manual Del Usario

CONFIGURATION

EN
To configurate the pump accordingly with your application needs, refer to the below instructions.
Press and hold the ON/OFF key for at least 3 seconds
"Pn" (no. of parameter) is
The value of the selected
parameter is dispalyed
Store the set value and increase the parameter number. At last parameter, exit the
8 | BL220 PERISTALTIC PUMPS
"Edi" is displayed
Release the ON/OFF key
displayed
ON/OFF
ON/OFF
configuration mode.
[+] key Increase /decrease the
[-] key parameter number
[+] key
Increase /decrease the
[-] key
parameter value