Power Linking; Replacing The Fuse; Dmx Linking; Master/Slave Connection - Chauvet Professional OVATION E-910FC Guía De Referencia Rápida

AC Power
This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.

Power Linking

You can link up to 6 Ovation E-910FC products at 120 VAC, 11 products at 208 V, or 12 at 230 VAC. Never exceed this
number. Power linking cords can be purchased separately.
AC Plug
Connection
AC Live
AC Neutral
AC Ground
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it

Replacing the Fuse

1. Disconnect this product from power.
2. Using a flat head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove blown fuse and replace with a good fuse of the same type and rating.
4. Screw the fuse folder cap back in place and reconnect power.

DMX Linking

The Ovation E-910FC will work with a DMX controller using either a 3- or 5-pin DMX serial connection. A DMX Primer is
available from www.chauvetprofessional.com.
DMX Connection
The Ovation E-910FC uses a 3- or 5-pin DMX data connection for its DMX personalities: 3 Ch, 5 Ch, 7 Ch, 10 Ch,
12 Ch, 13 Ch, 15 Ch, and HSV. See the User Manual for information about connecting and configuring the product for
DMX operation.

Master/Slave Connection

The Ovation E-910FC uses the DMX data connection for its master/slave mode. See the User Manual for information
about how to connect and configure the product for master/slave operation.
RDM (Remote Device Management)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally
along existing DMX cabling. Check the DMX controller's User Manual or with the manufacturer as not all DMX controllers
have this capability. The Ovation E-910FC supports RDM protocol that allows feedback to monitor temperature and
changes to DMX address and DMX channel menu map options. Download the User Manual from
www.chauvetprofessional.com
Ovation E-910FC QRG Rev. 11
QUICK REFERENCE GUIDE
Wire (U.S.)
Black
White
Green/Yellow
for more details.
Wire (Europe)
Brown
Blue
Green/Yellow
EN
Screw Color
Yellow/Brass
Silver
Green
2