Power Linking; Replacing The Fuse; Dmx Linking; Dmx Connection - Chauvet Professional ROGUE R3 Sport ROGUE Guía De Referencia Rápida

What is Included
• Rogue R3 Spot
®
• Neutrik powerCON
AC Power
This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.

Power Linking

It is possible to link up to 2 Rogue R3 Spot products at 100 V, 3 products at 120 V, 6 products at 230 V, 6 units at 240 V.
Never exceed this number. Power-linking cords can be purchased separately from Chauvet.
AC Plug
Connection
AC Live
AC Neutral
AC Ground
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.

Replacing the Fuse

1. Disconnect the product from power.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove blown fuse and replace with a good fuse of the same type and rating.
4. Screw the fuse holder cap back in place and reconnect power.

DMX Linking

The Rogue R3 Spot will work with a DMX controller using a 3- or 5-pin DMX serial connection. A DMX Primer is available
at www.chauvetprofessional.com.

DMX Connection

The Rogue R3 Spot uses a 3- or 5-pin DMX data connection for its 2 DMX personalities.. See the User Manual for
information about connecting and configuring the product for DMX operation.
RDM (Remote Device Management)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally
along existing DMX cabling. Check the DMX controller's User Manual or with the manufacturer, as not all DMX controllers
have this capability. The Rogue R3 Spot supports RDM protocol that allows feedback to make changes to menu map
options. Download the User Manual from
Rogue R3 Spot QRG Rev. 4
QUICK REFERENCE GUIDE
®
power cord
Wire (U.S.)
Black
White
Green/Yellow
www.chauvetprofessional.com
• 1 Omega bracket with mounting hardware
• Quick Reference Guide
Wire (Europe)
Brown
Blue
Green/Yellow
for more details.
EN
Screw Color
Yellow/Brass
Silver
Green
2