Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
DESCRIPTION OF THE APPLIANCE AND ACCESSORIES
Look at Figure [A] in the illustration section to check the content of the packaging. All figures
are found in the inside pages.
1.
Lid.
2.
Jug.
3.
Blades.
4.
Gasket.
•
Unpack the appliance.
•
Wash the removable components: lid (1), jug (2), blades (3) gasket (4) by hand or in the
dishwasher.
•
In the dishwasher, make sure the maximum temperature of the water does not exceed
55°C.
ATTENTION!
•
Do not use the appliance with no ingredients in it.
•
Do not introduce more than 800 ml of ingredients.
•
Always close the jug (2) with the lid (1) when the appliance is in operation.
•
Continuous operation must not exceed 3 minutes. Before repeating this
cycle, let the appliance cool down for one minute.
•
Do not leave any food inside the jug (2) beyond the time required for
preparation.
•
Place the appliance on a flat and firm surface.
•
Place the gasket (4) onto the blade plate (3) [Fig. B].
•
Insert the blades (3) inside the ring nut (5) [Fig. C].
•
Turn the ring nut (5) clockwise onto the jug (2) [Fig D].
•
Insert the jug (2) onto the motor unit (7) [Fig. E].
•
Add the fruit or vegetables into the jug (2) with a high percentage of liquids.
•
Close the jug (2) with the lid (1).
The on/off control (8) has the following two positions:
0
Appliance OFF.
Low speed.
1
The LED (6) lights up in positions 1-2-P.
Proceed as follows after having assembled the appliance:
•
Insert the plug in the socket.
MI000955_multi.indd 7
5.
Ring nut.
6.
LED.
7.
Motor casing.
8.
On/off control.
CLEANING BEFORE FIRST USE
ASSEMBLY
OPERATION
2
High speed.
Pulse function to add volume to the processed contents.
P
USE
GB
IT
7
6/26/12 3:06 PM
Publicidad
Tabla de contenido
