Marantz professional PMD-500D Guia Del Usuario página 19

Playback Setup
•
Power On Mode
o Repeat: When set to On, a disc will automatically repeat when it starts playing. When set to
Off, you will have to set the repeat mode using the front panel or remote control.
o DVD/CD Auto Play: When set to On, a disc will start playing automatically after you insert it.
When set to Off, you will have to start disc playback manually after inserting it.
•
Setting
o Auto Resume: When set to On, PMD-500D will "remember" where you stop playing a disc.
When you start playing that disc again, you can choose to start from that point or from the
beginning of the disc. PMD-500D can do this for up to 5 discs, replacing the oldest one if it
needs to remember a new one. When set to Off, this feature is disabled.
•
Language
o OSD: The language of the text shown in PMD-500D's menus, screens, windows, etc.
o Disc Menu: The language of the text shown in disc menus. The disc must be able to display
the selected language for this feature to work properly.
o Audio: The language of the audio on a disc. The disc must be able to play audio in the selected
language for this feature to work properly.
o Subtitle: The language of the subtitles shown during video playback. The disc must have
subtitles for the selected language for this feature to work properly.
•
Parental Control
o Ratings: Select the highest rating that can be viewed: Kid Safe, G, PG, PG-13, PGR, R, NC-
17, or Adult. When a disc or video file does not include rating information, no content is
restricted. You will need to enter the Password to change the rating.
o Change Password: Select this to change the parental control password, which must be 4
digits. Use the number buttons (0–9) to enter a number. (You must enter the current password
first. You must also enter the new password twice to ensure you entered it correctly.)
Video Setup
•
Output Setting
o Video Adjust: Press OK to edit Sharpness, Brightness, Contrast, Gamma, Hue, and
Saturation. Use the left/right cursor buttons () to adjust the sliders. For Sharpness, select
High, Medium, or Low. For Gamma, select None, Low, Medium, or High. Press the left cursor
to return to the previous screen.
o TV Aspect Ratio: Select the desired aspect ratio: 4:3 Pan & Scan, 4:3 Letterbox, 16:9 Wide,
Wide Squeeze.
o TV System: Select the broadcasting standard for your location: NTSC, PAL, or Multi-system.
By default, this should already be set to the correct format for your location. Select Multi-
system only if your TV supports both NTSC and PAL systems.
o Resolution: Select the picture resolution: Auto (PMD-500D will detect the optimal resolution
automatically), 480i/576i, 480p/576p, 720p, 1080i, or 1080p.
o HDMI Deep Color: Select the Deep Color mode for the HDMI output: 30 bits, 36 bits, 48 bits,
or Off (24 bits). Each setting indicates the total bit depth that an HDMI v1.3 picture will use.
Using a higher bit depth usually improves gradients and color transitions. Your TV must
support HDMI v1.3 for this feature to work properly.
o Screen Saver: Set the Screen Saver On or Off.
•
Closed Caption
o Closed Caption: Sets the closed captions On or Off.
19