Installation
Door removal for entrance
If the refrigerator cannot pass through the entrance due to its size, follow these
instructions:
Tools required (not provided)
These tools are used for removing the doors.
Phillips screwdriver
Disconnect the water line
30
English
Untitled-28 30
Flat-heat
screwdriver
A
B
Socket spanner
(10 mm)
1. From the bottom rear side of the
refrigerator, pull out the water line to
the front.
NOTE
The refrigerator's water line is a water
circulation line that connects between the
water pipe from the water source and the
hoses from the water filtering system of
the refrigerator.
2. To disconnect the hoses, press and hold
the transparent coupler (A) and detach
the water hose (B).
CAUTION
Do not apply excessive force to the
coupler. It may break.
Allen spanner
(5 mm)
7/17/2017 4:54:43 PM