Resol V40 Manual Del Usaurio página 12

Note
Please pay attention to the flow direction
when mounting the V40 (pay attention to the
flow direction indicated on the flowmeter!). In
order to smooth the flow, an inlet zone and
an outlet zone of 30 cm in front of and behind
the flowmeter have to be taken into account.
ATTENTION! Pressure surge damage!
Cavitation in hydraulic systems can
lead to pressure surges.
Î Fill the system in a cold state
Î Use an air separator.
12
only.
Massbild
Version 1
Irradiation impeller DN20
A mounting length without fitting
Einbaulagen
mounting with fitting
C height with pulser
Rohrleitung
D height at centre of pipe
counter width
Kopf des Zählers
weight without fitting
Vertical and horizontal mounting is possible
Druckverlustk
1.5 m³/h 2.5 m³/h
110 mm 130 mm
208 mm 228 mm
108 mm
waagrecht
90 mm
senkrecht
72 mm
nach oben
0.7 kg
zur Seite