Electrical connection scheme
To the vehicle's antenna
connector **
Use adapter
8 694 419 761
if necessary
Use adapter
8 694 419 774
if necessary
Antenna input
Car radio
Fuse/connector
box
Modulator
brown
red, + 12 V
CD changer
CDC-A05, 06, 071, 072, 08
black
Ground *
yellow
+ 12 V constant power
red
CDC-FM 08
remote control
Ground *
Fuse, 3 A
* Connection to a dedicated
ground connector marked or an
unpainted part of the chassis
(scratched down to the bare me-
tal).
** Use adapter 7 691 290 202
(AUDI, SEAT, VW)
Connection to a 12 V voltage
source which is activated when
the ignition is switched on and
deactivated when the ignition is
switched off.
Caution: If the car radio is con-
nected to the battery + terminal
only, you will need to use the
following type of connection:
Connection to the 12 volt
switching voltage output of
the car radio (e.g. switch plus
for an amplifier).
Caution: In the case of Blau-
punkt car radios with TIM
function, the switch plus output
for the aerial must not be used.
Note: In order to ensure fault-
free operation, the "RDS" radio
function AF (Alternative Fre-
quency) must be switched off.
Fig. 2 Electrical connections
17