Save Phace I Serie Guia Del Propietario página 5

MORE INFORMATION
• This information is intended for ALL Save Phace EFP 1 (Extreme Face Protector) models.
• This EFP is intended as a Welding Helmet and Grinding Mask as per ANSI and CE standards
for low impact protectors.
• All parts on the EFP are replaceable. Please contact your local Save Phace Retailer/Distributor
for these parts.
• For accessories, including magnification lenses and other cool accessories, please contact your
local Save Phace Retailer/Distributor or log onto www.SavePhace.com
• All Save Phace ADF lenses have a 2 year warranty. You must register your product to obtain
warranted replacement products.
• If you take care of this EFP it should last you a lifetime!
• CE EN 175:1997 –F means this product passed all of the requirements as stated by the European
Counsel. The CE EN 175:1997 means this particular EN 175 was adopted in 1997. The –F means
it passed the low impact standards.
• When transporting your product we recommend placing it in a nice Helmet Bag that comes with
your purchase.
• Replacement parts on the EFP are recommended when broken, damaged or cracked. Otherwise,
replace the EFP lenses are recommended once per year.
• This Product meets or exceeds ANSI Z87.1 Standards.
• This Product meets or exceeds CSA Standards.
NOTES
• When not using your EFP or EFP ADF lens, we recommend keeping them in a bag away from
harmful chemicals or extreme heat.
• DO NOT USE ANY lens Cleaner, Windex®, Alcohol or Gasoline. Use of any of these or similar
products will damage the coatings and lens.
• ALWAYS use OSHA/CE approved safety glasses when welding.
5