Sangean WR-2 Instrucciones De Manejo página 18

2) Adjust MW tuning step
1. Ensure that your radio is switched off. Press and hold down the
M4 button until AM step begins to appear in the display.
Hold down the M4 button for another 8 seconds until AM step
begins to flash in the display .
2. Rotary the tuning control to adjust required AM tuning step
(rotary down to get 9 kHz and rotary up to get 10 kHz).
3. Press the M4 button again to complete setting.
Display will return to clock status after setting.
Change 12/24 hour clock format
1. Ensure that your radio is switched off. Press and hold down
the M3 button until current clock format begins to appear in the
display. Hold down the M3 button for another 8 seconds until
clock format begins to flash in the display.
2. Rotary the tuning control to adjust required clock format
(rotary up to get 24 hours format and rotary down to get 12 hours
format).
3. Press the M3 button again to complete setting.
Display will return to clock status after setting .
Note: remote control is not applicable for this operation.
17