Tabla de contenido
Publicidad
Enlaces rápidos
Publicidad
Tabla de contenido
Manuales relacionados para AccuBANKER AB1050
Resumen de contenidos para AccuBANKER AB1050
- Página 1 User Guide Commercial Bill Counter AB1050...
- Página 2 Thank you for purchasing this AccuBANKER product. We recommend reading all information in the user guide to become familiar with this product. AccuBANKER and its logo are registered trademarks of Hilton Trading Corp. All Rights Reserved.
-
Página 3: Tabla De Contenido
Table of Contents Important Safety Instructions 1. Introduction 2. Box Contents 3. General Parts and Controls Description 3.1 Parts description 3.2 Control Panel 4. Basic Operation 4.1 Notes Selection 4.2 Proper positioning of the notes on the Hopper 4.3 Counting Mode 4.4 AUTO / MANUAL Modes 4.5 Batch Function 4.6 Counterfeit Detection functions (Optional) -
Página 4: Important Safety Instructions
Important Safety Instructions When using this bill counter, basic safety precautions should always be followed to reduce the risk of fire, electric shock or injury to persons; including the following: Warn in g Caution Do not use this product in areas where it may be exposed to water When unplugging the power cord, do not pull it by the or other liquids. -
Página 5: Other Safety Considerations
Other Safety Considerations • Read and understand all of the safety instructions. • Follow all warnings and instructions marked on the unit. • This product should never be placed near or over a radiator or heater register. This product should not be placed in a built-in installation unless proper ventilation is provided. - Página 6 Other Safety Considerations • Unplug this product from the wall outlet and refer to servicing by qualified service personnel under the following conditions: - When the power supply cord or plug is damaged or frayed. - If liquid has been spilled into the unit. - If the unit has been exposed to rain or water.
-
Página 7: Introduction
1. Introduction The AB1050 Series is our newest back-loading model that provides a simple and rapid manner for counting money. It is the perfect solution when a fast, accurate and a reliable banknotes processing is the goal to achieve. It is ready to tackle the most demanding tasks, from counting large amounts of cash, to batching custom bill quantities. -
Página 8: Box Contents
When opening the box, verify that all of the items described below are included. If any item is damaged or missing, contact the place where the unit was purchased. 1. Bill Counter unit AB1050 2. Power Cord 3. User Guide and Warranty documents... -
Página 9: General Parts And Controls Description
3. General Parts and Controls 3.1 Parts description 1. Hopper 2. Hopper Guiders 3. Retractable Handle 4. Control Panel 5. Stacker 6. Bill Thickness Adjustment Knob 7. Power Switch 8. Power Outlet 9. External Display jack... -
Página 10: Control Panel
3. General Parts and Controls Cont. 3.2 Control Panel Ultraviolet Detection function ON / Off. (Optional function) Magnetic Ink Detection function ON / Off. (Optional function) Size: Size Detection function ON / Off (Width). ADD: Adding function ON / Off. Counts all the bills placed on the hopper and add them to the total counted earlier. -
Página 11: Basic Operation
4. Basic Operation 4.1. Notes Selection For ensuring a trouble-free unit’s operation, consider: 1. Avoid counting wet, excessively dirty, spoiled, folded or curved notes. 2. Check for foreign objects mixed up with the bills like paper clips, rubber bands, pieces of paper etc. 3. -
Página 12: Proper Positioning Of The Notes On The Hopper
4. Basic Operation Cont. 4.2 Proper positioning of the notes on the Hopper Back-loading machines are very sensitive to the well positioning of the bills in the hopper, continuous errors may occur during the counting due to a bad positioning of the bills. Proceed with the following instructions for placing the bills on the hopper. -
Página 13: Counting Mode
4. Basic Operation Cont. 4.3 Counting Mode The default mode of the machine is the Counting mode. All banknotes placed in the hopper will be counted automatically as soon as they are sensed. 4.4 AUTO / MANUAL Modes The unit comes from factory with AUTO counting mode as default. Pressing the RESTART button for 3 sec. -
Página 14: Counterfeit Detection Functions (Optional)
4. Basic Operation Cont. 4.6 Counterfeit Detection functions (Optional) a. Ultraviolet Detection function (just available for the model AB1050 UV) UV function is able to check all types of banknotes containing UV features and will alert the user in case it fails with the warning message “EE-1” along with a beeping alarm. -
Página 15: Size Detection (Width)
4. Basic Operation Cont. MG sensitivity adjustment The user could customize the MG sensitivity in order to make this function more accurate for any specific currency. Press the MG key to activate or deactivate the MG function. 1. Press down the “Set” key twice on the control panel, and the “Sd – #” message will come out on the screen. -
Página 16: Avoiding Problems
5. Troubleshooting 5.1 Avoiding Problems Pre-select the notes you are going to count in the unit. Don’t attempt to count bills: a. with staples, metal clips, rubber bands or any other object b. torn, washed or damaged c. profusely stained d. - Página 17 5. Troubleshooting Cont. 5.3 Jamming • Before beginning the operation of the machine, make sure there are no foreign objects in any of the mechanisms such as silica bags, spare parts, etc. • To avoid jamming, ensure that banknotes are placed correctly in the hopper, as was shown in section 4.2.
-
Página 18: Unit Maintenance
6. Unit Maintenance 6.1 Cleaning the Optical Sensors It is important to clean all of the sensors in the unit to avoid any paper particles or dust from sticking to the sensors. This should be done everyday if possible. The glass surfaces of the sensors may be wiped with a soft cloth soaked with alcohol (refer picture below). -
Página 19: Warning And Error Messages
7. Warning and Error Messages ERROR CAUSE SOLUTION Remove the bill and resume the UV function alarm counting. Recheck the suspect bill Remove the bill and resume the MG function alarm counting. Recheck the suspect bill Half note detected Remove the damaged bill Size function alarm Remove the bill CODE... -
Página 20: Specifications
8. Specifications Counting Speed: 1200 notes/min. Counterfeit Detection: SIZE and UV-MG (optional) Interfaces: External Display connection Display: LEDs Display Hopper Capacity: 200 notes (new) Stacker Capacity: 200 notes (new) Banknote size range: 100mm x 50mm - 185mm x 100mm Power Requirements: Single Phase 110V / 60 Hz. Also available in 220V / 50 Hz Power Consumption: <... - Página 21 Notes...
- Página 22 Related Products D500 AB610 AB410...
- Página 23 AB300 AB1100 AB300 AB4000 AB4000 AB300 AB1100 AB4000 B300 AB1100 AB4000 AB5000 AS100 4000 AB5000 AS100 AS100 AB5000 AS100 AS100 7104 NW 50 Street•Miami, FL 331366 | tel 305.594.09 7104 NW 50 Street•Miami, FL 331366 | tel 305.594.0950 | ab.