ART. 09/08730-00
TABLE OF CONTENTS:
1.
Safety information .......................................................................4
1.1 Preparation ..................................................................................4
1.2 Usage .......................................................................................4
1.3 Marking ..................................................................................4
1.4 Maintenance ..........................................................................4
2.
Description .............................................................................4
2.1 Part name .................................................................................4
2.3 Sign definition ...........................................................................5
3.
Specification ...........................................................................5
3.1 General ....................................................................................5
3.2 Technique data ........................................................................5
4.
4.1 Power On/Off ............................................................................5
4.2 Reading hold ...........................................................................5
4.3 Backlight function .....................................................................5
4.5 Wind speed unit selection ...........................................................6
4.6 Area setting .................................................................................6
4.9 Use tripod connection receptacle .................................................6
4.10 Replace battery ............................................................................6
5.
Attachments ...............................................................................6
1. Safety Information
Please read carefully the following safety information before usage and
maintain this anemometer while using it according to operating guidance,
otherwise, the anemometer may be damaged. The anemometer will provide
satisfactory services to you if you use and protect it appropriately.
1.1
Preparation
1.1.1 Please check for damage during transportation after receiving the
anemometer..
1.1.2 If it should be stored and shipped under hard conditions, please
confirm that whether the meter is damaged.
1.2
Usage
1.2.1 The meter should be used in the range of specified ambient
temperature and humidity.
1.2.2 If you notice any abnormality or failure, it should stop using.
1.2.3 Don't store or use the meter under the conditions of direct sunlight,
high temperature and high humidity.
1.2.4 Don't touch the fan blades with excessive force.
1.2.5 Don't directly expose the blades in the hard light to avoid reading
error.
1.3 Marking
The CE mark indicates compliance with EMC requirements.
ELCART DISTRIBUTION SPA via Michelangelo Buonarroti, 46 - 20093 Cologno Monzese (Milano) ITALY
Tel. +39 02.25117310 Fax +39 02.25117610 sito internet: www.elcart.com
La divulgazione dei dati contenuti in questa scheda è da ritenersi un servizio puramente informativo e non costituisce alcun vincolo da parte della Elcart in merito a prestazioni ed utilizzo del prodotto.
The divulgation of data contained on this technical sheet are exclusively for informational reasons and establish no link on behalf of Elcart regard to thr performances and the usa of the product.
La divulgacion de los datos contenidos en esta ficha son un servicio unicamente informativo y no constituyen ningun vinculo de parte de Elcart respecto a las prestaciones y uso del producto.
ELCART
Manuale di istruzioni/Scheda tecnica
DIGITAL ANEMOMETER ART. 09/08730-00 NI 690
USER'S MANUAL
1.4 Maintenance
1.4.1 Repair or maintenance should be implemented by trained
personnel.
1.4.2 If there is dust on the fan blade, please blow it with clean air or
scrub gently with a damp cloth and mild detergent.
1.4.3 Clean the meter with a damp cloth and mild detergent.
Don't use abrasive material or solvent.
1.4.4 The meter should be powered off when it is not in use.
1.4.5 The meter will consume small current, about ≤5μA, after shutdown.
If the meter is not to be used for a long period, batteries should be
removed to prevent damaging the meter.
2. Description
• This meter is a digital anemometer for measuring the ambient tempe-
rature, humidity, dew point temperature, wet bulb temperature, wind
speed, and air volume.
• This meter is a portable, professional measuring instrument with large-
screen LCD and backlight, multi-unit switching functions.
• This meter can be used for hand-held or fixed measurement.
• This meter has the functions of reading hold, maximum, minimum, etc.
• It has a low battery indicator.
2.1 Part name
1. Fan
2. LCD
3. "FUN" → Function switching button
4. " " → Power Switch
5. "UNIT" → Unit switching button
6. Maximum/Minimum button
7. "HOLD" hold display, switch temperature mode
8. " " → Backlight
PAGINA 4 DI 9
e-mail: info@elcart.it