Ariston SENSYS NET Instrucciones De Instalacion Y Uso página 33

4.1 Types of possible installations
Type 1
Activation of TD and RC in a basic heating
System where the Ariston product is connected exclusively to a single ON/OFF
temperature regulation accessory and you need to go there to activate the Ariston Net
Remote Control and Teleassistance services.
Actions required (Fig. 2):
- Remove the ON/OFF accessory and disconnect the bipolar cable from the TA input
of the boiler
- Install Ariston Sensys and the gateway, connecting them to the heating product via
the BridgeNet BUS connection.
TA
system(fig.1)
Fig. 1
THERMOSTAT
GATEWAY
BUS
Fig. 2.
SENSYS
GB / 33