Ariston SENSYS NET Instrucciones De Instalacion Y Uso página 35

Type 3
Activation of TD and RC on a system with 2 or more plumbing zones controlled by
BridgeNet BUS devices
System where there is an Ariston multi-zone plumbing module to which BridgeNet Bus
zone management accessories are connected such as an Ariston Sensys and/or Ariston
Room Sensor.
Actions required (Fig. 6):
- Remove all Ariston Room Sensor accessories or thermostats in the system and
replace them with Ariston Sensys
- Install the gateway, connecting it to the heating system via the BridgeNet BUS
connection.
BUS
(fig.5)
Fig. 5
ROOM
SENSYS
SENSOR
BUS
PLUMBING
MODULE
GATEWAY
BUS
BUS
PLUMBING
MODULE
Fig. 6
SENSYS
GB / 35