Ariston SENSYS NET Instrucciones De Instalacion Y Uso página 40

3. Download and start the Ariston Net app according to the configuration wizard.
Otherwise, open the web browser (Internet Explorer, Safari, Chrome, etc.) and enter
the link 192.168.1.1 in the address bar.
4. There are two possible configurations:
a. Automatic (recommended)
-. Select your own wireless (SSID) network and enter the password.
- Leave the default setting DHCP = ON
- Continue to point 5
b. Manual
- Keep the selection SSID = Manual
- Write the name of the Wi-Fi network in the SSID field. State the type of authentication
used in the Authentication and Authentication Type fields and enter the password
- Select DHCP = OFF
- Enter the static IP address assigned to the gateway
- Enter the network mask
- Enter the Ips of the router and of the DNS
5. Click Confirm.
6. Once you get to the last step, if the procedure has been successful, the WEB LED will
start flashing green quickly and then become stable. The average waiting time is 4-5
minutes.
At this point you have completed the procedure.
Warning!
After confirming the procedure, your device (smartphone, PC, tablet ...) will automatically
disconnect from the Remote Gw Thermo network and an error message may appear
on the display. If this is the case, your device may have to be reconfigured on your Wi
Fi network.
40 /GB