Toto FBY1515LP#01 Manual Del Usario página 3

Install Bathtub
5
For future maintenance provide proper access to the plumbing areas.
•
WARNING: Do not lift or move the bathtub without assistance. A
!
cast iron bathtub is extremely heavy and may cause personal injury.
WARNING: Do not support the bathtub by the rim. Provide ade-
!
quate support under the bathtub feet.
With help, carefully place the bathtub into position.
•
The bathtub must be resting on all the feet. Level the bathtub by us-
•
ing metal shims where necessary.
Verify the bathtub is level by placing a level on the bathtub top sur-
•
faces in both directions.
Install Plumbing
6
WARNING: Ensure all connections are watertight. This will prevent leaks and property
!
damage.
Connect the drain to the trap according to the manufacturer's instructions.
•
Install the faucet valve according to the manufacturer's instructions.
•
Open the water supply and check all connections for leaks.
•
Verify there is no leakage at the drain connection.
•
Fill the bathtub to the overflow and check for leaks.
•
Completing the Finished Flooring (Apron models)
7
After connecting the drain to the trap add the finished flooring as desired.
•
The finished flooring needs to cover over the gap between the apron bottom and the sub-floor.
•
Installation (continued)
Apron Models
FBY1515, FBY1525 and FBY1715.
Maximum gap is 10 mm
(3/8").
Bathtub top
surface
Level by fitting
metal shims
under the feet