EarthWise CVP41810 Manual Del Operador página 4

UNPACKING
This product requires assembly.
Carefully remove the product and any accessories from the box.
Make sure that all items listed in the packing list are included.
Inspect the product carefully to make sure no breakage or damage
occurred during shipping.
Do not discard the packing material until you have carefully inspected
and satisfactorily operated the product.
PACKING LIST

Hedge Trimmer Cutting Head - Chain Saw Cutting Head

Blade Covers - Telescopic Pole w/Should Strap - Rear
Handle - Instruction Manual
WARNING: If any parts are damaged or missing do not operate this
product until the parts are replaced. Failure to heed this warning
could result in serious personal injury.
If any parts are damaged or missing, please call 1-800-313-5111 for
assistance.
CONVERTING FROM CHAIN SAW TO POLE SAW
1. Lift the quick release button. Pull to remove the handle from the
cutting head. (Fig. 1)
Quick release button
FIG. 1
2. Insert the telescopic pole into the chain saw cutting head. Press
down the quick release button. Make sure the release button
snaps firmly to lock the parts securely. (Fig. 2)
Pole
FIG. 2
3. Insert the rear handle into the end of the telescopic pole. (Fig. 3)
Press down the quick release button. Ensure the release button
snaps firmly into position to lock the handle securely.
Pole
Rear
Handle
ASSEMBLY
CONVERTING FROM POLE SAW TO CHAIN SAW
1.
2.
CONVERTING FROM HEDGE TRIMMER TO POLE HEDGE
TRIMMER
1.
Rear handle
2.
Quick Release
Button
3.
FIG. 3
4
Disconnect rear handle and cutting head from ends of tele-
scopic pole by lifting the quick release button and pulling straight
out. (Fig. 4-5)
Insert the rear handle directly into the chainsaw cutting head .
When fully inserted, press down the quick release button.
Make sure the button snaps in firmly and securely, locking the
parts together.
Lift the quick release button. Pull to remove the handle from the
cutting head. (Fig. 6)
Quick Release
Button
Rear
handle
Insert the telescopic pole into the hedge trimmer cutting head.
(Fig. 7) Press the quick release button into a locked position.
Quick Release
Button
Pole
Insert the rear handle into the end of telescopic handle. (Fig. 8)
Press down the quick release button. Ensure the release button
snaps firmly into position to lock the handle securely.
Quick Release
Button
Rear
Handle
FIG. 6
FIG. 7
FIG.8