How To Operate - Nostalgia Electrics RWT500 Serie Manual De Instrucciones

HOW TO OPERATE

• Place the AUTOMATIC WINDOW TOASTER on a stable surface
near an electrical outlet before starting.
• Always make sure that the cord is away from any water source.
• Ensure there is nothing blocking and there are no foreign objects inside the toaster slots.
• Plug the appliance into an electrical socket.
• Once plugged in, the Stop Heat and Power On Lights will flash
twice. That indicates the toaster is in standby mode.
• Before use, adjust the Slot Width Adjustor according to the bread slice thickness.
For best results, use bread slices of even thickness, size and freshness.
• Place two pieces of bread into openings in the Toaster. Do not operate
AUTOMATIC WINDOW TOASTER without at least one piece of bread in place.
• Select desired heat setting (Min to Max). Min is light. Max is dark.
• Press ON to start toasting cycle and lower bread into the toaster.
• When cooking has completed, the bread will automatically
rise up. Unit and Power On Light will turn off.
• To shorten the cooking time, simply turn the heat control knob to a lighter setting.
• To stop cooking before cycle has completed, press the STOP button.
• Unplug the appliance and allow unit to cool completely.
• After unit is cool to the touch, remove the Crumb Tray and follow
directions in Cleaning and Maintenance section to clean unit.
• After cleaning, return Crumb Tray to the toaster and store your
AUTOMATIC WINDOW TOASTER in a safe place until next use.
By following these simple instructions, your AUTOMATIC WINDOW
TOASTER will be a great addition to any home kitchen!
6