How To Operate - Nostalgia Electrics BTG100 Serie Instrucciones Y Recetas

HOW TO OPERATE

• Place the BREAKFAST TOASTER on a stable surface near an electrical outlet
before starting. Always make sure that the cord is away from any water source.
• Plug the appliance into an electrical socket.
• Pull out Flip Down Griddle Latch and lower Nonstick
Griddle so that Latch is resting on flat surface.
• Set timer for 2 to 5 minutes to preheat Nonstick Griddle before cooking.
• Apply a thin coat of vegetable oil to surface of
Nonstick Griddle Plate to protect finish.
• Set timer on Nonstick Griddle to desired setting (0 to 30 min.).
• Begin to cook breakfast meat, eggs, pancakes or desired food
item. Cooking time will vary depending on the items being cooked.
Thicker cuts of meat and patties will take longer to cook.
• Place two peices of bread into openings in the the Toaster.
• Select desired heat setting (Light to Dark).
• Press lever down to start cooking cycle.
• When cooking has completed, the bread will automatically pop up.
• To shorten the cooking time, simply turn the heat control knob to a lighter setting.
• To stop cooking before cycle has completed, press the CANCEL button.
• Unplug the appliance and allow unit to cool completely.
• After unit is cool to the touch, remove the Nonstick Griddle Plate and Drip
Tray and follow directions in Cleaning and Maintenance section to clean unit.
• After cleaning, return Nonstick Griddle Plate and Drip Tray to the toaster
and store your BREAKFAST TOASTER in a safe place until next use.
By following these simple instructions, your
BREAKFAST TOASTER will be fun for
friends, family and kids of all ages!
REMOVING THE NONSTICK GRIDDLE
• After you are done cooking with your BREAKFAST
TOASTER and unit has cooled completely, place
fingers on Griddle Locks and push locks toward you.
• You will hear Nonstick Griddle Plate snap
as the locking mechanism is released.
• Carefully lift Nonstick Griddle Plate up, being
VERY careful not to spill hot liquids. For added
safety, wear oven mitts or use potholder.
• Empty contents of Nonstick
Griddle Plate into wastebasket and clean thoroughly.
• Replace Nonstick Griddle Plate, making sure back of Nonstick
Griddle Plate slides into Nonstick Griddle Base.
• Push notches on sides of Nonstick Griddle Plate inside the
6