Setting Turn Off Time; Minimum Run Time Software - IVAC Pro Guía Del Usario

5.3 Setting Turn Off Time

This feature applies to the 'iVAC Pro Switch'. After the 'iVAC
Pro Switch' has been instructed to turn off by a 'Tool Plus'
there is a programmable delay to enable all dust to be cleared
from the system. The 'iVAC Pro Switch' is shipped with the
Turn Off time set at 5 seconds. The time can be set to 0
seconds, 5 seconds, 15 seconds or 45 seconds. The Turn Off
time is set by means of positions 5 and 6 on the Program
Switch.
5.4 Minimum Run Time. Software
When a dust collector is initially powered up, there is a heavy
surge current to the motor generating internal heat. If the dust
collector is cycled on and off frequently
This increase in power can cause damage to the motor. In
order to reduce the risk of damage, the manufacturer specifies
the number of times a motor should be started in a period of