Farberware WM-CS6004W Manual Del Usuario página 22

)
Problem
y
Steam is released
from exhaust valve
without break
d
Lid cannot be closed
easily
Lid cannot be
opened easily
Steam is leaking
from lid
Steam leaks from
float valve for more
than
2 minutes
The appliance heats
up but the display
and/or buttons do
not light up
Pressure Cooker_WM-CS6004W_IM_US_V6_161219.indd 21
TROUBLESHOOTING
Cause
Exhaust valve handle is not
in steam sealing position
Pressure control is not
working properly
Seal ring is not installed
correctly
Float valve is standing out
Appliance is still
pressurized
Float valve is stuck while
standing out
Lid not closed properly
Seal ring not installed
Seal ring damaged or
worn out
Residue is preventing lid
from closing properly
Residue on float valve
Float valve silicone cap
worn out
Damaged display and/or
buttons
Solution
Turn exhaust valve handle to
sealing position
Contact support
Check and adjust seal ring
position
Lightly press float valve down
Wait for appliance to cool
down and use steam release to
reduce internal pressure
Use chopstick or handle of thin
kitchen utensil to slightly push
float valve down – do not use
bare fingers, float valve may be
hot and can cause burns
Ensure lid position mark
and lid position indicator
aligned
Install seal ring
Replace seal ring
Clean lid and seal ring
Clean float valve
Replace float valve silicone cap
Press the STOP button, then
disconnect the appliance from
the wall outlet and contact
qualified personnel to check
and repair the appliance
21
are
12/19/16 10:15 AM