Adjusting The Soundbar Volume With A Tv Remote Control - Samsung HW-M4500 Manual De Instrucciones


Surround
VOL WOOFER
WOOFER
SOUND
MODE

VOL
VOL

Adjusting the Soundbar volume with a TV remote control

Use the TV menu to set the TV speaker on a Samsung TV to external speakers.
(For more information, see the TV's user manual.)
• After installing the Soundbar, you can adjust the Soundbar's volume using the IR remote control
that came with a Samsung TV. (If you do not want to use this function, when the Soundbar is on,
press and hold the Surround button for 5 seconds. "OFF-TV REMOTE" appears in the Soundbar's
display and the function turns off.)
To adjust the volume using only the Samsung TV remote control, press and hold the Surround
button for more than 5 seconds until "SAMSUNG-TV REMOTE" appears in the Soundbar display.
– Each time the Surround button is held for 5 seconds, the mode switches in the following order:
"SAMSUNG-TV REMOTE" (Default mode) → "OFF-TV REMOTE" → "ALL-TV REMOTE".
• To adjust the Soundbar volume with the remote control that came with a TV made by a third party
manufacturer, turn the Soundbar on, press and hold the Surround button for 5 seconds
("OFF-TV REMOTE" appears on the Soundbar's display), release the Surround button, and then
press and hold the Surround button again for more than 5 seconds. ("ALL-TV REMOTE" appears on
the Soundbar's display.)
– This function may not be available, depending on the remote control.
– Manufacturers supporting this function:
VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, GRUNDIG, Hisense, RCA
Bluetooth
POWER
Push the button up or down to adjust the volume of the subwoofer to -12 or -6 to +6.
Pressing the button reverts the subwoofer volume to level 0.
WOOFER
Push the button up or down to adjust the volume.
• Mute
Press the VOL button to mute the sound. Press it again to unmute the sound.
ENG - 24