Manual Mode; Specification - koban KCL-01 Manual De Instrucciones

KCL-01
Manual Mode (Press the MODE button)
Select Manual mode by means of "downward selection
". When the manual mode is selected the symbol
"SENSE" are displayed..
AC NCV Detection Mode
When press NCV button, the flashlight will be active.
7
EN

Manual Mode

AC NCV Detection Mode
EN

2.4 Specification

Transmitter:
Output signal 125kHz
External voltage detection
Voltage Range 12...400V
Frequency Range 0...60Hz
Display LCD display
External Voltge Detection max. 400V AC/DC
Over Voltage Category CAT III 300V
Pollution Degree 2
Auto Power Off approx.1 hours (No any Operation )
Power Supply One 9V battery , NEDA 1604, IE6F22.Power
Consumption max. 18mA
Fuse F0.5A 500V, 6.3 x 32 mm
Temperature Range (Work) 0...40°C, max 80% rel. humidity (not condens.)
Temperature Range (Storage) -20...60°C, max 80% rel. humidity (not condens.)
Height above MSL up to 2000meters
Dimensions 130 x 69 x 32mm
Weight approx. 130g
Receiver:
Tracing depth The tracing depth depends of medium and application
Cable Locator Mode approx. 0...2meters (single-pole application)
approx. 0...0.5meters (double-pole application)
Voltage detection approx. 0...0.4meters
Display LCD with functions- and bargraph
Power Supply One 9V battery , NEDA 1604, IE6F22.Power
Consumption approx. 23mA (without backlight or lamp)
approx. 35mA (with backlight)
max. 40mA (Backlight and lamp)
Auto Power Off approx. 5minute (No any Operation )
Temperature Range (Work) 0...40°C, max 80% rel. humidity (not condens.)
Temperature Range (Storage) -20...60°C, max 80% rel. humidity (not condens.)
Height above MSL up to 2000meters.
Dimensions 192 x 61 x 37mm
Weight approx. 180g
KCL-01
8