ExpressChill™
How it Works
The ExpressChill™ feature is a system of dampers, a fan and a temperature
thermistor.
The pan is tightly sealed to prevent the pan's temperature from causing temperature
fluctuations in the rest of the refrigerator.
The controls for this pan are located in the top of the refrigerator or on the dispenser
with the temperature controls.
How to Use
1. Empty the pan. Place the Chill Tray in the pan. Place
the items on the tray and close the pan completely.
2. Select the ExpressChill ™ pad. On some models, you
can then select the chill time (use chart to determine
best setting). Other models will only have one option
(45 minutes). On models with multiple settings, tap the
pad until the light appears next to the desired setting.
How to Remove and Replace the Drawer
To remove:
1. Pull the drawer out to the
stop position.
2. Rotate all four swing locks
to the unlock position.
3. Lift the front of the drawer
up and out.
ExpressChill™ Chart
NOTE: Results may vary depending on packaging, starting temperature and other food traits.
15 Minutes
2 Small Juice Boxes
49-60646-6 Rev. 7
(on some models.)
(on some models)
30 Minutes
2 to 6 Beverage Cans
of Beverage
4 to 6 Small Juice Boxes
Wine (750 ml bottle)
before it is finished, tap
that feature's pad until
no options are selected
and the display is off.
the display on the
controls will count down
the time in the cycle.
To replace:
1. Make sure all four swing
locks are in the unlock
position.
2. Place the sides of the drawer
into the drawer supports,
making sure the swing locks
fit on the drawer slots.
3. L ock all four swing locks by
rotating them to the lock
position.
45 Minutes
2 Liters of Beverage
1/2 Gallon of Juice
Gelatin—1 package
7