Moving The Refrigerator; Refrigerator; Remove The Base Grille - GE Appliances 22 Manual Del Usaurio

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

MOVING THE REFRIGERATOR

CAUTION
Lifting Hazard.
Single person lift can cause injury. Use assistance
when handling, moving or lifting the refrigerator
doors.
NOTE: When moving door, to prevent damage to
door and electronics carefully place the door in a
proper location.
WARNING
To reduce the risk of electric shock
or injury during installation, you must first unplug the
instructions can result in electrical shock.
LOADING THE REFRIGERATOR
1
ONTO A HAND TRUCK
Leave all tape and door pads on doors until
the refrigerator is in its final location.
To move the refrigerator, use a padded
hand truck. Center the refrigerator on the
hand truck and secure the strap around the

refrigerator.

DO NOT OVERTIGHTEN THE STRAP.
49-60646-6 Rev. 7
Installation Instructions

REMOVE THE BASE GRILLE

2
Remove the grille by removing the two
Phillips head screws.
doors must be removed. Proceed to
Step 3.
DO NOT remove the handles.
DISCONNECT THE WATER
3
COUPLING (on some models)
there is a water line from the cabinet into the
disconnected.
To disconnect, push in on the white collar of the
coupling and pull out the tubing.
Bottom
hinge
.
White collar
21

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido